How to Choose a Laser Acrylic Cutter

laser acrylic cutter

If you are looking for a machine to cut acrylics, you have come to the right place. We will discuss some of the basic factors that you should consider when choosing a These include the cost, frequency, resolution, and Diode. Listed below are some tips to help you choose the best for your needs. This type of machine can be used for cutting non-metals and engrave metals.

Cost of a laser acrylic cutter

The most common plastic for laser cutting is acrylic. Acrylic has many desirable mechanical properties and can be instantly quoted. It is available in a variety of thicknesses and styles, and has no minimum order quantity. Acrylic is also known as PMMA or Plexiglas(r). It is a perfect replacement for glass and has much greater impact resistance than glass. Here’s how to determine if acrylic is right for your project.


Choosing the correct laser for an acrylic cutting project is vital for creating high quality, durable pieces. There are many different types of acrylic, including extruded and cast. Extruded acrylic has a higher surface finish, and is recommended for engraving. Cast acrylic is transparent and will show some striation marks on its edges. When purchasing an acrylic cutting machine, be sure to choose the power rating of the laser module. Low-power diode lasers are great for etching on thin sheets, while CO2 lasers around 60W are recommended for cutting thick acrylic.


If you’re in the market for a laser acrylic cutter, there are several different factors to consider. While the cutting process is quite similar to that of a conventional saw, laser acrylic cutting is significantly more efficient. The cutting process involves vaporizing solid material, which is changed to liquid or vapour by a laser. While the resulting vapour has a low chemical degradation, it’s extremely flammable. Because of this, you’ll need a vacuum system to remove this vapour.


The resolution of a laser acrylic cutter is the quality of the image that the cutting laser produces. When working with this material, it is important to keep the work table at a level two to ten centimeters above the surface. Using a high resolution can produce images that are too faint. The resolution of a laser acrylic cutter is usually 250 DPI, although softer materials may need less resolution. When selecting a laser acrylic cutter, you should consider the following factors:

Dimensions of cut

Lasers are powerful, but they also burn material as they cut. Depending on the type of material and other conditional factors, laser kerf can range anywhere from 0.08mm to 1mm. The maximum range, however, is usually 0.45mm. If the details are too narrow, the material may warp or break. The following table will outline the typical dimensions of a laser cut. The table will also include the dimensions of the kerf.


Laser cutting is safe if you take precautions. Using a laser acrylic cutter involves the vaporization of acrylic materials. The laser energy vaporizes the material, changing it from a solid to a liquid, or vice versa. However, there is minimal chemical degradation that occurs during this process, which helps keep the finished product high quality. In any case, use protective gear to protect yourself from the harmful effects of laser cutting.

Leave a Reply

Your email address will not be published. Required fields are marked *