The SF6025H5 Metal Laser Cutter

metal laser cutter

The SF6025H5 is a 4’x8′ flatbed If you’re considering buying one of these machines, this article will cover the advantages of each model. Also, read on for tips and tricks for getting the best results with them. After reading the following, you should be well-prepared for your first cutting project. Hopefully, this article has helped you decide which to buy. You can also use the information provided here to compare various machines in the market.


The JustCut metal laser cutter is a high-tech laser cutting system for processing metal sheets. It is equipped with nLIGHT laser sources and can produce up to 3 kW of laser output. The JustCut is capable of cutting through a variety of metals. The laser cutter’s double servomotor, chain and sprocket structure enhance the cutting speed. The JustCut metal laser cutter is easy to operate.

A high-quality lens focuses the laser beam onto the work zone. The narrowest spot of the focused laser beam is only 0.0125-inch-wide (0.32-mm). This allows for kerf widths as small as 0.004-inch-wide, depending on the thickness of the material. For every cut, a piercing process is performed using a high-power pulsed laser beam. This process takes approximately five to fifteen seconds for 13 mm-thick stainless steel.


The SF6025H5 metal laser cutter from Bystronic is a powerful cutting tool with a wide range of applications. Specifically designed for the production of sheet metal parts, this system is used in a variety of industries such as rail transit, forestry, elevator manufacturing, and decorative advertising. Its cutting range varies from 0.4 to 50 mm. Bystronic has offices in Canada, the United States, and Mexico, and is headquartered in Hoffman Estates, Illinois.

SF6025H5 features a fiber laser device with an output power of eight to 36 kW, making it suitable for cutting medium and thick steel plates. This metal laser cutter has an impressive working area of 39.5 x 8.3 feet and has passed CE/FDA/ETL certifications. Its high-power fiber laser device is easy to maintain and does not produce any waste. Moreover, its fiber laser device features a higher power density at the focal point and a high absorption characteristic.

MC-Series 4’x8′ flatbed metal cutting fiber laser

The MC-Series 4’x8″ flatbed metal cutting fiber laser from Kern includes many features to make it easy for you to cut various types of metals. It features a computer system and monitor for easy operation, a built-in chiller to prevent overheating, and multiple safety features. The MC-Series 4’x8′ industrial fiber laser is a large-size machine with a work area of 4’x8′ and a fiber laser powering 200W to 2kW. It is capable of cutting a variety of metals, including aluminum, steel, stainless steel, copper, and other alloys.

The AMADA MC-Series 4’x8″ flatbed metal cutting fiber laser features Locus Beam Control (LBC). It can create infinite locus patterns and greatly enhance cutting performance. Conventional fiber laser systems lose energy density as the material becomes thicker. With LBC technology, AMADA provides high-energy density, flexible beam patterns, and high-speed processing, allowing the MC-Series to cut up to three times faster than a conventional 4kW fiber laser. It is also capable of producing superior edge quality.

Leave a Reply

Your email address will not be published. Required fields are marked *